Polygon wall

9.1.2.3. Polygon wall

With this command you can draw the wall along a reference line, defining nodes with each click. The reference line may contain arcs and lines too. It is different from the previous function because the program will draw wall alignment only until you end the command.

Define the starting corner point of the wall and then the other nodes. The endpoint of the wall coincides with the starting point of the next wall. The joint can be normal or tangential, and the wall can be linear or arc.

Define the endpoint of the next wall, or

Enteryou can start drawing a new wall, irrespective of the previous one.

Enter completes the command.

The program will display the walls.

Options:

CENTERED	Places the reference line centered.
RIGHT / LEFT	Places the reference line on the right / left side of the wall.
SMOOTH	The next wall will be joined to the previous one tangentially.
ARC	Draws arc wall.
TANGENT	If the first element of a polyline is an arc, you can define a tangential vector for the arc. You can continue an existing wall with a tangential arc.
SELITEM	Places the selected object into the contour of the profile.
INVERSE	Places wall reference line to the other side.